Channel and scan table setup
3-2 9390 Reference manual
Customising channels
You can customise the way channels are set up in your
transceiver. For example, you might want to:
• change channel comments to help you remember how
channels are used
• copy regularly used channels to group them for
convenience (for example, creating a group of 10
channels with channel numbers 9001 to 9010).
Channel settings
Transmit channel settings consist of:
• frequency (either a single transmit/receive frequency or a
two-frequency simplex)
• sideband (upper and AM—lower/selectable needs local
authority approval)
• tone call group (1–4 or none)
• selcall group (option, 1–5 or none)
• channel protection (on/off)
• channel comment (description of channel).
Receive-only channel settings consist of:
• frequency
• sideband (upper/lower/selectable)
• channel protection (on/off)
• channel comment (description of channel).
When you send a call, the frequency and sideband have to be
the same for both stations. The channel number is
unimportant.
To Next Page
Loading...
