About this manual
9390 Reference manual 1-3
Standards and icons
In this manual, Arial typeface in single quotes is used for text
shown on the transceiver display. For example:
If ‘
no response
’ was displayed, send the call again.
Arial typeface in bold is used for the names of buttons, knobs
and connectors. For example:
Press the
On/Off
button.
This icon... Means...
the end of a subject.
a warning.
On/Off
the transceiver button or knob
that you need to operate (the
On/Off
button in this example).
The solid area in the picture of
the transceiver control panel on
the left shows you where to find
the button or knob.
Call
the microphone button that you
need to operate (the
Call
button
in this example). The solid area
in the picture of the microphone
on the left shows you where to
find the button.