Codan 9390 - Display Contrast Adjustment

Setup procedures (part 2)
6-4 9390 Reference manual
Display contrast
Setup code 312
This procedure controls the contrast of the display.
You can also adjust the contrast of the display using the
On/Off
button on the control panel (refer to the 9390 User
guide, Chapter 4, Adjusting the display contrast).
To adjust the contrast of the display:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 312
numeral
buttons
The display shows:
EXIT
LCD Contrast
Adjust contrast
with Select knob.
ENTER
3.
To adjust the contrast,
rotate
Select