Link Setup mode
9-10 9390 Reference manual
Setup mode availability on/off
This procedure switches the availability of Setup mode on or
off.
After you have used Setup mode to set how the transceiver
operates, denying casual access to Setup mode safeguards
against accidental deletion or modification of programmed
information.
For example, a transport manager controlling a fleet of ships
might use this procedure to stop the transceivers installed in
the ships from being modified once they have been set up.
To switch the availability of Setup mode on or off:
Action Notes
1.
Enter Link Setup mode. See Link Setup mode enter/exit
on page 9-2.
The display shows:
LINK SETUP MENU
1–Pin
2–Inhibit
ENTER
3–Antenna
4–Reset
2.
Enter 2
F1
2
The display shows:
EXIT
Setup Mode
Setup mode enabled
ENTER
ENABLED
or
EXIT
Setup Mode
Setup mode disabled
ENTER
DISABLED
To Next Page
Loading...
Need help?
General
