Codan 9390 - Power Up Mute Setting

Setup procedures (part 3)
9390 Reference manual 7-11
Power up mute setting
Setup code 34412
This procedure controls the initial mute setting used when the
transceiver is switched on (powered).
You can select:
• ‘
NO MUTE
’
• ‘
AUDIO MUTE
’
• ‘
SELCALL MUTE
’ (if selcall mute availability is
switched on, see Chapter 8, Selcall mute availability
on/off).
To change the initial mute setting used when the transceiver
is powered:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2