Setup procedures (part 3)
7-18 9390 Reference manual
PTT transmit cutout
Setup code 3431
This procedure prevents the transceiver from being left on in
the transmit state by mistake.
If the transmit time exceeds the time set for PTT transmit
cutout, the transceiver switches to receive and displays an
error message.
This cutout does not apply to any equipment connected to the
GP
connector.
You can select:
• ‘
OFF
’ (transmission never cuts out)
• ‘
5 mins
’
• ‘
10 mins
’
• ‘
15 mins
’
• ‘
20 mins
’
• ‘
35 mins
’.
To set the PTT transmit cutout time:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2
To Next Page
Loading...
