Setup procedures (part 1)
9390 Reference manual 5-11
ALE sounding interval (option)
Setup code 2433
This procedure changes the ALE (Automatic Link
Establishment) sounding time interval.
Before you can use this procedure, you need to enable both the
selcall and ALE options (see Chapter 7, Password entry to
enable transceiver options).
ALE stations repeatedly send sounding signals to determine
how good each channel is for transmission. The ALE
sounding interval is the time between signal transmissions.
You can select:
• ‘
30 Mins
’
• ‘
45 Mins
’
• ‘
1 Hour
’
• ‘
2 Hours
’
• ‘
4 Hours
’
• ‘
8 Hours
’
• ‘
16 Hours
’.
To change the ALE sounding time interval:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2
To Next Page
Loading...
