Codan 9390 User Manual

Setup procedures (part 2)
6-6 9390 Reference manual
Display frequency
Setup code 313
This procedure controls how the frequency is displayed for
each channel.
You can select:
• ‘
RX/TX
’
• ‘
INHIBIT
’
• ‘
RX ONLY
’
For two-frequency simplex channels, the ‘
RX/TX
’ setting
displays the transmit frequency above the receive frequency.
An arrow on the screen moves from the receive frequency to
the transmit frequency during transmission. For other
channels where the transmit and receive frequencies are the
same, this setting displays the single frequency.
The ‘
INHIBIT
’ setting displays no frequency for any channel.
The ‘
RX ONLY
’ setting displays the frequency in use,
whether single frequency or two-frequency simplex, which
changes to the transmit frequency during transmission.
To change how the channel frequency is displayed:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2

Codan 9390 Specifications

General

Brand	Codan
Model	9390
Category	Transceiver
Language	English