Codan 9390 - Page 109

Setup procedures (part 2)
9390 Reference manual 6-7
Action Notes
2.
Enter 313
numeral
buttons
The display shows one of the
following:
EXIT
Show Tx and Rx freq
ENTER
RX/TX
Freq. display format
EXIT
Show no frequencies
ENTER
INHIBIT
Freq. display format
EXIT
Show Rx freq. only
ENTER
RX ONLY
Freq. display format
3.
To switch between the
settings, rotate
Select
Select:
• ‘
RX/TX
’ to display both
transmit and receive
frequencies
• ‘
INHIBIT
’ to display no
frequencies
• ‘
RX ONLY
’ to display
receive frequency only.
4.
To save your change,
press
F2
The display shows:
EXIT
DISPLAY MENU
1–Bright
ENTER
2–Contrast
3–Format