Codan 9390 - Deleting a Channel

Channel and scan table setup
9390 Reference manual 3-19
Deleting a channel
This procedure deletes unprotected channels.
You cannot delete protected channels unless you have option
TXE.
You cannot delete factory set Radphone channels. Deleting a
modified Radphone channel resets the Radphone channel to
its factory set condition.
To delete a channel:
Action Notes
1.
In Channel mode, select
the channel that you want
to delete.
Example of the display for
channel 9985:
USB
HI
RF–ON
Rx.
9985
Inshore
Pwr
8,550
8,731
Unprotected channels show the
unprotected marker (small
square) on the left of the
display.
2.
Press twice
Enter
R'call
Example of the display:
DELETE
ENTER
Enter Channel No.
9985
3.
Press
F1
Example of the display:
YES
NO
DELETE CHANNEL?
9985