Codan 9390 User Manual

Setup procedures (part 2)
9390 Reference manual 6-13
GPS timeout on/off (option)
Setup code 3422
This procedure switches GPS (Global Positioning System)
timeout warning on or off.
Before you can use this procedure, you need to enable both the
selcall and GPS options (see Chapter 7, Password entry to
enable transceiver options).
When GPS timeout is switched on, the transceiver ‘beeps’ if
it does not receive GPS information within the set time.
You can select:
• ‘
5 mins
’
• ‘
10 mins
’
• ‘
15 mins
’
• ‘
20 mins
’
• ‘
35 mins
’
• ‘
OFF
’ (no error ‘beep’).
To switch GPS timeout on or off:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2

Codan 9390 Specifications

General

Brand	Codan
Model	9390
Category	Transceiver
Language	English