Codan 9390 User Manual

Setup procedures (part 4)
9390 Reference manual 8-13
Selcall ID size compatibility (option)
Setup code 213
This procedure controls how you communicate with stations
that can not use IDs longer than four digits.
Before you can use this procedure, you need to enable the
selcall option (see Chapter 7, Password entry to enable
transceiver options).
You can select:
• ‘
4-DIGIT-COMPATIBLE
’
• ‘
6-DIGIT-ONLY
’.
If some stations in your network are only capable of using
4-digit IDs and your self ID is longer than four digits, select
‘
4-DIGIT-COMPATIBLE
’. This allows other stations to call
you using the last four digits of your self ID. For example, if
your self ID is 123456, you can be called on ID 3456 as well
as ID 123456—the transceiver will respond to both.
If all the stations in your network are capable of using 6-digit
IDs, select ‘
6-DIGIT-ONLY
’. This ensures you can only be
called by stations that specify your full self ID. You will not
receive unwanted calls by chance matching of the last four
digits of your self ID.
To set the operating compatibility for 4 or 6-digit selcall ID:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2

Codan 9390 Specifications

General

Brand	Codan
Model	9390
Category	Transceiver
Language	English