Setup procedures (part 4)
9390 Reference manual 8-19
Selcall mute availability on/off (option)
Setup code 212
This procedure controls whether you can select selcall mute
by pressing the
S’Call Mute
button on the control panel.
Selecting selcall mute availability off, disables the selcall
mute button.
Before you can use this procedure, you need to enable the
selcall option (see Chapter 7, Password entry to enable
transceiver options).
Switch selcall mute availability off if you never use selcalls.
This will stop you selecting selcall mute by accident and
missing incoming voice calls.
To switch the availability of selcall mute on or off:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2
To Next Page
Loading...
Need help?
General
