9390 Reference manual 7-1
7 Setup procedures (part 3)
This chapter describes the following Setup mode procedures:
• Password entry to enable transceiver options (7-2)
• Power up message on/off (7-8)
• Power up mute setting (7-11)
• Power up selcall self ID display on/off
(option, 7-14)
• PTT release beep on/off (7-16)
• PTT transmit cutout (7-18)
• Recall channels by frequency on/off (7-20)
• RF gain on/off (7-22)
• RS-232 connected equipment (7-24)
• RS-232 connection baud rate (7-27).
To Next Page
Loading...
Need help?
General
