Setup procedures (part 2)
9390 Reference manual 6-11
GPS display on/off (option)
Setup code 3421
This procedure switches on or off the display of your
transceiver’s GPS (Global Positioning System) latitude and
longitude.
Before you can use this procedure, you need to enable both the
selcall and GPS options (see Chapter 7, Password entry to
enable transceiver options).
To switch the displaying of GPS information on or off:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Setup mode.
The display shows:
EXIT
SETUP MENU
1- Scan-
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 3421
numeral
buttons
The display shows:
EXIT
Display LAT and LONG
ENTER
ENABLED
GPS Display
or
EXIT
GPS Display
GPS display disabled
ENTER
DISABLED
To Next Page
Loading...
Need help?
General
