Using Setup mode procedures
9390 Reference manual 4-3
List of Setup mode procedures
Procedure Page Setup
code
Description
ALE option settings 5-2 2431 Controls how the ALE controller works
(option).
ALE option reset 5-9 2432 Resets the ALE option settings 0–16 to their
factory values (option).
ALE sounding
interval
5-11 2433 Changes the ALE sounding time interval
(option).
Beep loudness 5-13 33 Controls the volume of ‘beep’ tones made by
the transceiver.
Call preamble
length
5-15 242 Sets the length of the preamble transmitted at
the start of a selcall or ALE call (option).
Call privacy on/off 5-17 2443 Limits the stations that can receive your
transmissions of GPS and page information
(option).
Clock calibration 5-19 412 Calibrates the transceiver clock against an
external standard.
Clock setting 5-21 411 Sets the time and date of the transceiver
clock.
Clone a transceiver 5-26 Copies the settings from one transceiver to
another by a process called cloning.
Display brightness 6-2 311 Controls the brightness of the display.
Display contrast 6-4 312 Controls the contrast of the display.
To Next Page
Loading...
Need help?
General
