Codan 9390 User Manual

Using Setup mode procedures
4-4 9390 Reference manual
Procedure Page Setup
code
Description
Display frequency 6-6 313 Controls the displayed channel frequency.
Free-Tune Receiver
mode availability
on/off
6-9 3442 Controls the use of Free-Tune Receiver mode.
GPS display on/off 6-11 3421 Switches on or off the display of your
transceiver’s GPS latitude and longitude
(option).
GPS timeout on/off 6-13 3422 Switches GPS timeout warning on or off
(option).
Password entry to
enable transceiver
options
7-2 42 Enables transceiver options that are built into
the transceiver and deletes forgotten PINs.
Power up message
on/off
7-8 34411 Allows you to set up a message which is
displayed for several seconds when the
transceiver is powered up.
Power up mute
setting
7-11 34412 Controls the initial mute setting used when the
transceiver is powered up.
Power up selcall
self ID display
on/off
7-14 34413 Controls whether the self ID is displayed
when the transceiver is powered up (option).
PTT release beep
on/off
7-16 3432 Switches PTT release ‘beeping’ on or off.
PTT transmit
cut-out
7-18 3431 Prevents the transceiver from being left on in
the transmit state by mistake.
Recall channels by
frequency on/off
7-20 32 Controls whether you can recall channels by
frequency as well as channel number.

Codan 9390 Specifications

General

Brand	Codan
Model	9390
Category	Transceiver
Language	English