Setup procedures (part 3)
9390 Reference manual 7-7
Action Notes
4.
Enter the PIN deletion
password
numeral
buttons
5.
Press
F2
If the password is incorrect, the
transceiver ‘beeps’ and
switches off after displaying
this for three seconds:
EXIT
PASSWORD INVALID
ENTER
A630–9A00–0000–DD
– – – – – – – – –
1 2 3
If the password is correct, the
transceiver enters Channel
mode after displaying this for
10 seconds:
PASSWORD
PIN deleted
To set up a new PIN, see
Chapter 9, PIN setup.
To Next Page
Loading...
