Codan 9390 - Page 141

Setup procedures (part 3)
9390 Reference manual 7-25
Action Notes
2.
Enter 3411
numeral
buttons
The display shows:
EXIT
RS232 Mode Setup
ENTER
No connection
None
or
EXIT
RS232 Mode Setup
ENTER
Computer connected
Computer
Other screens may be displayed
if you have enabled ALE and
GPS options.
3.
To switch between the
settings, rotate
Select
Select:
• ‘
NONE
’ if nothing is
connected
• ‘
COMPUTER
’ if a
computer is connected
• ‘
GPS NMEA-0183
’ if
GPS has been enabled and a
GPS receiver is connected
• ‘
9300 ALE
’ if an ALE
controller is connected.