9390 Reference manual 2-1
2 Installation
This chapter describes how to install your transceiver and
connect the components that make up your station.
It covers:
• type of station (2-2)
• installing the transceiver (2-5)
• installing the control head (2-7)
• power supply (2-10)
• grounding—RF earth (2-12)
• ancillary equipment (2-16).
On receipt of your transceiver, check the contents against the
packing list. Ensure all items are available before starting
installation.
The procedures for installing your transceiver are not
comprehensive. They are to be used as a guide only. We
recommend that installation be carried out by qualified and
experienced personnel.
To Next Page
Loading...
Need help?
General
