Codan 9390 User Manual

Channel and scan table setup
9390 Reference manual 3-25
‘
Hold
’ Use Hold scanning if you expect voice calls and
want scanning to hold for as long as the voice is
detected on the channel.
Each channel is scanned for one second unless
voice is detected. Scanning also stops for
selcalls.
‘
ALE
’
(option)
Use ALE scanning if you are using an ALE
controller and expect ALE calls.
Scanning stops for both selcall and ALE calls.
Mute is on.
To set up a scan table:
Action Notes
1.
In Channel mode, press
Scan
The display shows:
EXIT
PROGRAM
Press SCAN to Scan
Scan Table: 1
2.
To select one of the three
scan tables, rotate
Select
Select scan table 1, 2 or 3.
3.
Press
F2
Example of the display for scan
table 2:
DELETE
Scan Table: 2
ENTER
F1 to delete table
F2 to program table

Codan 9390 Specifications

General

Brand	Codan
Model	9390
Category	Transceiver
Language	English