Using Setup mode procedures
9390 Reference manual 4-9
If you are comfortable using menus and selecting menu
options, you can refer to the Setup mode tree instead of
entering setup codes to access each procedure. This allows
you to use Setup mode by directly following the guidance
shown on the transceiver display.
Each branch in the menu tree shows:
• the name of the menu item shown on the display
• the name in small print of the equivalent procedure in
this manual, if any, for this menu item
• the setup code in parentheses.
To navigate around the Setup mode tree, use front panel
button:
•
F2
to select a highlighted menu option and advance
down the tree
•
F1
to go back up the tree to the previous menu.
For example, you could branch down to the ‘
Power Up
’
menu and view each of the ‘
Power Up
’ menu options,
‘
Message
’, ‘
Mute
’ and ‘
Show ID
’, in turn making any
changes to settings as necessary.
To Next Page
Loading...
