9480 HF SSB transceiver 7-1
7. Programming channels
Your transceiver can store up to 15 channels. Channels may be
copied and have their options modified, such as:
• S–selective call
• Upper Side Band mode (USB) or Lower Side Band mode.
You can create or change the transmit and receive frequencies of
your transceiver from the front panel controls.
Where transmit frequencies are to be programmed,
permission from the local licensing authorities or similar
authorities should be sought.
Channels are stored in memory but can be reprogrammed or
deleted at any time by the operator.
All displays in this section show examples of channel and
frequency numbers. You must insert your selected channel and
frequency numbers.
To Next Page
Loading...
