Using the transceiver
9480 HF SSB transceiver Error! Main Document Only.-23
Making an emergency call
The Emergency Call button is used to transmit a digital emergency call to a preset
station address. There are two ways you can transmit a digital emergency call:
• automatic method
• manual override.
Automatic method
Step Action… Display shows… Remarks…
1.
Hold down
Emgcy
Call
for two seconds.
During this two second
period the transceiver
generates ‘pip’ sounds.
The transceiver
immediately changes to
the preset emergency
channel. If no channel
has been preset, the
current channel is used.
Refer to page 4-21.
After the two seconds has
elapsed, automatic tuning
begins regardless of
whether the channel has
been previously tuned.
After the tune sequence
terminates, the
emergency call is
transmitted to the preset
station selcall ID
regardless of whether the
automatic tune process
succeeded.
q
To Next Page
Loading...
Need help?
General
