Programming channels
7-8 9480 HF SSB transceiver
Creating transmit and receive channels
All transceivers have the facility to create or change the receive channels from the
front panel.
You can create or change the transmit and receive frequencies of your transceiver
from the front panel controls.
Permission from the local licensing authorities or similar authorities should be
sought before using this procedure to create transmit channels.
Ensure your transceiver is switched on before commencing this procedure.
Step Action… Display shows… Remarks…
1.
Press
Enter
Your next action must
start within 60 seconds.
2.
Use the numeric
buttons to enter
the transmit
frequency.
This example is for
transmit frequency 3421.
The frequency must be
entered to the nearest
100 Hz, between
250 kHz and 30 MHz.
3.
Press
Enter
To Next Page
Loading...
Need help?
General
