Codan 9480 User Manual

Using selective call
9480 HF SSB transceiver 5-5
Setting the preamble time period
Step Action… Display shows… Remarks…
1.
Ensure your
transceiver is
switched off.
2.
Hold down
Call
and press
On/Off
Hold the Call button
down for approximately
three seconds.
This turns the transceiver
on and into the preamble
setup mode.
3.
Press
Channel
to set the
preamble length.
or
Pressing the or
buttons alternates
between a long and short
preamble.
4.
Press
Enter
Once enter has been
pressed, the preamble
time has been set and can
only be changed by
repeating this procedure.
If your transceiver has
the preset selective
calling switches fitted,
proceed to step 6.

Codan 9480 Specifications

General

Brand	Codan
Model	9480
Category	Transceiver
Language	English