Codan 9480 - Setting the Self-Identification Address

Using selective call
9480 HF SSB transceiver 5-7
Setting the self-identification address
Step Action… Display shows… Remarks…
7.
Use the numeric
buttons to enter
the self-
identification
address number.
To delete an
address, enter four
zeros.
You can override an
existing address by
entering a new number.
8.
Press
Enter
Once Enter has been
pressed, the self-
identification address has
been set and can only be
changed by repeating this
procedure.
The next step must be
completed within 60
seconds.