Codan 9480 - Emergency Call Functions

Using the transceiver
9480 HF SSB transceiver Error! Main Document Only.-21
Setting up for emergency call transmission
In order to use the Emergency Call feature several setup steps must be undertaken.
Step Action… Display shows… Remarks…
1.
With the
transceiver
switched off, hold
down
Emgcy
Call
then
press
On/Off
The display indicates the
emergency selcall ID has
not been programmed.
2.
Press
the appropriate
numeric keys
followed by
Enter
In this example, selcall
ID 9876 has been input.
This is the only address
to which a digital
emergency call can be
sent.
If the ID you enter ends
in a double zero (group
call), the call may be
responded to by 100
transceivers.