Changing the setup options
9480 HF SSB transceiver Error! Main Document Only.-11
Changing or deleting a PIN
This procedure allows you to change or delete your PIN.
Step Action… Display shows… Remarks…
1.
Turn the
transceiver off
and move the
front panel link to
position 1.
No display. Before moving the link,
note its original position.
Refer to the procedure on
page 8-3.
2.
Hold down
3
and press
On/Off
Hold down the numeric 3
button until the display
shows
This switches on your
transceiver in PIN setup
mode.
3.
Use the numeric
buttons to enter
your existing PIN,
then press
Enter
Example of existing PIN
number 1234.
You may now change or
delete the PIN.
To Next Page
Loading...
Need help?
General
