Using the transceiver
9480 HF SSB transceiver Error! Main Document Only.-11
Using the clarifier
The clarifier buttons raise or lower the frequency in steps of 10 Hz. This allows you
to fine tune the transceiver to obtain the best clarity for received voice calls.
Step Action… Display shows… Remarks…
1.
Press either the up
or down arrow
Clarifier
Adjust for the best clarity
using the Clarifier
button.
You hear a ‘pip’ when
the clarifier control has
reached its operating
limit.
Note: the clarifier resets
to the middle frequency
when you change
channels, or switch off.
q
To Next Page
Loading...
