Using selective call
Error! Main Document Only.-10 9480 HF SSB transceiver
Selective call mute enable or inhibit
This facility enables or inhibits the operation of the S’call Mute function. When S’call
Mute is inhibited, you cannot operate selective call mute.
Step Action… Display shows… Remarks…
1.
Turn the
transceiver off
and move the
front panel link to
position 1.
No display. Before moving the link,
note its original position.
Refer to Section 8,
Changing the position of
the front panel link.
2.
Hold down
Mute
Voice
S’Call
and press
On/Off
Hold the Mute button
down until the display
shows
Repeatedly pressing
Mute switches between
enable and inhibit
(inhib).
3.
Press
Mute
Voice
S’Call
Stop at the selection you
require.
4.
Press
On/Off
No display. The transceiver is now
switched off.
To Next Page
Loading...
Need help?
General
