9480 HF SSB transceiver Error! Main Document Only.-1
4. Using the transceiver
This section covers the basic steps necessary to operate your
transceiver.
It outlines how you use the control buttons to make various
adjustments and settings, and includes transmitting and
receiving calls.
Throughout this section all displays show examples of
channel and frequency numbers. You must insert your
selected channel and frequency numbers as appropriate.
Unless otherwise stated, it is assumed throughout this section
that:
• the 12V DC power is supplied to your transceiver
• the front panel On/Off button is switched on.
Refer to page 4-2, Switching the transceiver on or off.
To Next Page
Loading...
Need help?
General
