Display messages
Error! Main Document Only.-2 9480 HF SSB transceiver
Messages and operator errors
No. of ‘beeps’ Message displayed Meaning
2
The automatic antenna has been
satisfactorily tuned.
2
The automatic antenna has failed to
tune.
2
An attempt has been made to
transmit before the automatic
antenna has been tuned. Wait until
the automatic antenna has tuned.
If a fault exists, refer to the antenna
handbook for details.
1
An attempt has been made to enter
more than 15 channels in the scan
program.
0
A channel has been entered in the
scan program.
1
An attempt has been made to
transmit on a receive-only channel,
or while the scan mode is selected.
If the transceiver is scanning, press
the Scan button to stop scanning. If
the channel selected is a receive-
only channel, select another
channel.
To Next Page
Loading...
Need help?
General
