Using selective call
Error! Main Document Only.-14 9480 HF SSB transceiver
Transmitting a selective call
For selective call to operate you must have your self-identification number
programmed, refer to page 5-7, Setting the self-identification address.
Step Action… Display shows… Remarks…
1.
Select the
channel.
Ensure the channel is
enabled for selective
calls.
Press the ‘Disp’ button to
view the enabled options.
If you need to enable the
channel, refer to page
5-12, Enabling a channel
for selective call.
2.
To tune the
antenna, press
Tune
Refer to Section 4,
Tuning the antenna.
3.
Press
Mute
Voice
S’Call
to turn the Mute
button to the off
position.
The display does not
change.
The indicator turns off
and you hear background
noise.
To Next Page
Loading...
Need help?
General
