Codan 9480 - Page 73

Using selective call
9480 HF SSB transceiver 5-13
Step Action… Display shows… Remarks…
5.
Press
Call
repeatedly until an
S appears in the
left hand position
of the options bar.
You hear a ‘pip’.
6.
Press
Enter
You hear a ‘pip’.
7.
Use the numeric
buttons to enter
the channel
number you wish
to use.
8.
Press
Enter
If the channel is already
used the display shows
9.
If the channel is
already used, you
can either enter
another number or
press Enter again
to override the
existing one.
The display reverts to
normal.
The information will
either be stored under an
existing channel number
or you will have created
a new one.
q