Using selective call
Error! Main Document Only.-18 9480 HF SSB transceiver
Answering a received call
This procedure is used when you want to answer a call that has just been received
while your transceiver is still producing a ringing tone.
Step Action… Display shows… Remarks…
1.
The display shows
the channel
number and the
identification
address of the
caller.
2.
Press the
microphone PTT
button twice in
succession.
The display either reverts
to the normal display or
shows the details of the
next (if any) unanswered
calls.
The first press of the
PTT button cancels the
call and the S’call mute.
The second press of the
PTT button allows you to
transmit to the caller.
q
To Next Page
Loading...
