Using the transceiver
Error! Main Document Only.-4 9480 HF SSB transceiver
The transceiver display
The display provides you with visual indication of the selected channel numbers, and
the transmit and receive frequencies. In addition, it shows you messages that will
assist you when operating your transceiver. A detailed description of all the messages
can be found in Section 9, Display messages.
The display and button legends of the front panel are back-lit to give you the clearest
view. If necessary, the brightness can be adjusted to suit your needs. Refer to page
4-6, Dimming the display and indicators.
This section explains what the option codes mean and how to reveal the option codes
on the display.
The display contains two rows of information. Each row is split into three groups.
What you see in each group depends on the transceiver mode selected.
Option codes
Code Description
S
in the far left hand position indicates that selective call is
enabled for this channel.
L
indicates the lower side band has been enabled for this
channel.
U
indicates the upper side band has been enabled for this
channel.
q
To Next Page
Loading...
Need help?
General
