Codan 9480 - Reviewing and Adjusting Setup Options

Changing the setup options
Error! Main Document Only.-6 9480 HF SSB transceiver
Reviewing setup options
This facility allows you to see what setup options have been enabled with the
transceiver. You can review the setup options at any time. This procedure does not
require you to move or install links in your transceiver.
Step Action… Display shows… Remarks…
1.
Ensure your
transceiver is off.
No display.
2.
Hold down
1
Disp
and press
On/Off
Hold down the Display
button until the display
shows
The display starts with
the scan setup option.
3.
To scroll through
the options press
1
Disp
Shows each option. Each press of the Display
button scrolls to the next
option:
SCAN prog ENAbLE
CHAN No inhib
diSP S-CALL ENAbLE
diSP CALL LONG
diSP Addr CALL
diSP Addr SELF
diSP bEACON ON
Ptt CutOut
diSP bEEPS loud
4.
To exit the review
mode and resume
normal
operations, press
the PTT button.
q