Using selective call
Error! Main Document Only.-20 9480 HF SSB transceiver
Reviewing the list of received calls in memory
Your transceiver is able to record up to 10 calls in memory from various stations.
These may be on different channels if your transceiver is in scan mode. These calls
are recorded in a memory stack awaiting your review. If a station calls more than once
on the same channel, your transceiver only records one of the calls. If more than 10
calls are made to your transceiver, the first call stored in memory is deleted to make
room for the latest call.
Ensure your transceiver is not in scan mode before commencing this procedure.
A loss of power to your transceiver will delete information stored in memory.
Ensure you record or use all the information stored in the memory stack before
switching off the transceiver.
Notes: If the transceiver power is lost momentarily (such as during starting the
vehicle engine), the call memory is retained but the number is lost.
Switching the transceiver off using the On/Off button deletes all calls
stored in the memory stack.
The Disp button is used to review the list of received calls held in the memory.
To Next Page
Loading...
Need help?
General
