Using selective call
9480 HF SSB transceiver 5-19
Returning a received call
This procedure is used when you want to return a call that has been stored in the
memory stack.
Step Action… Display shows… Remarks…
1.
Select the call you
wish to return.
If necessary, tune
the antenna.
The display shows the
channel number and the
identification address of
the caller.
Refer to page 5-20,
Reviewing the list of
received calls in
memory.
2.
Press
Call
The call details are now
deleted from memory,
but ready to transmit.
3.
Check that the
channel is free
from traffic, then
press
Call
The display shows the
details of the next
unanswered call.
The transceiver sends the
selective call and the
transmit indicator will
light.
If the call is answered,
proceed to use the
transceiver in the normal
way.
The caller details are
deleted when you press
the PTT button on the
microphone.
q
To Next Page
Loading...
Need help?
General
