Using the transceiver
9480 HF SSB transceiver Error! Main Document Only.-25
Setting up to receive an emergency call
It is recommended that only base stations are set to receive emergency calls as
they have broadband antenna systems and the emergency revertive siren is
instantaneous. A different station setup may cause a delay on the revertive siren.
Step Action… Display shows… Remarks…
1.
Hold down
Emgcy
Call
then press
On/Off
The display indicates the
emergency selcall ID has
not been programmed.
2.
Press
Enter
The display indicates that
the transceiver will not
respond to incoming
digital emergency calls.
3.
Press any
or
button
The transceiver will
respond from now on.
4.
Press any
or
button
Toggled off again.
To Next Page
Loading...
Need help?
General
