9480 HF SSB transceiver Error! Main Document Only.-1
8. Changing the setup options
Some of the setup options in this section can be completed by
the user; others must only be carried out by qualified personnel,
either at the Codan factory or by a Codan agent. A statement is
made in the procedure whenever qualified personnel are
required.
All displays in this section show examples of channel and
frequency numbers. You must insert your selected channel and
frequency numbers.
Setup option links
Some of the setup procedures may need a link to be moved
inside the transceiver, while some need a link soldered inside the
transceiver. The moveable link is called the front panel link
(refer to page 8-2, The front panel link). The soldered link is
called the microprocessor link (refer to page 8-4, The
microprocessor PCB link).
To Next Page
Loading...
Need help?
General
