9480 HF SSB transceiver Error! Main Document Only.-1
9. Display messages
In addition to showing the normal channel information, the
display is able to show messages indicating the results of an
operation, such as an operator error or a system error.
These error or fault messages are generally accompanied by one
or more ‘beeps’.
If a transceiver fault is indicated, the transceiver must be
switched off and tried again. If the fault re-occurs the transceiver
must be sent to Codan or a Codan agent to have the fault
rectified.
Messages are displayed for five seconds and then normal
operation is resumed. Pressing any button or the microphone
PTT button during this five second period immediately restores
normal operation.
To Next Page
Loading...
