Codan 9480 - Enabling a Channel for Selective Call

Using selective call
Error! Main Document Only.-12 9480 HF SSB transceiver
Enabling a channel for selective call
This procedure explains how to enable an existing programmed channel for selective
calling.
The displays in this section vary depending on the channel you select.
Step Action… Display shows… Remarks…
1.
Use
Channel
to find the channel
you wish to
enable.
This is an example for
channel 9.
Refer to Section 4,
Selecting channels.
2.
Press
Enter
You hear a ‘pip’.
3.
Press
Enter
You hear a ‘pip’.
4.
Press
Enter
You hear a ‘pip’.
The display shows the
individual options for the
chosen channel.