Codan 9480 - Checking if a Channel Is Enabled for Selective Call

Using selective call
9480 HF SSB transceiver 5-9
Checking if a channel is enabled for selective call
A channel must be enabled for the selective call facility to operate. If the channel you
wish to use has not been enabled, refer to page 5-12, Enabling a channel for selective
call.
Step Action… Display shows… Remarks…
1.
Hold down
1
Disp
An S in the left position
of the options bar
indicates that the channel
is enabled for selective
calling.
2.
Release
1
Disp
The display returns to its
original display in
approximately one
second.
q