Codan 9480 - Enabling or Disabling Selective Call Lockout; Enabling the Beacon Mode

Using selective call
Error! Main Document Only.-8 9480 HF SSB transceiver
Enabling or disabling selective call lockout
Step Action… Display shows… Remarks…
9.
Press
Channel
to switch the
selective call
lockout on or off.
Changes to:
or
Selective call lockout
prevents the user from
transmitting a selective
or beacon call if the
transceiver detects that
another station is making
a call.
10.
Press
Enter
This completes the
setting.
The next step must be
completed within 60
seconds.
Enabling the beacon mode
Step Action… Display shows… Remarks…
11.
Press
Channel
to switch the
beacon on or off.
or
Repeatedly pressing the
or buttons
switches the beacon on
and off.
For more information on
this feature, refer to page
5-23, Using the beacon
feature.
12.
Press
On/Off
This turns your
transceiver off and
registers all the new
selective call settings.
q