Using selective call
9480 HF SSB transceiver 5-21
Reviewing calls held in memory
This procedure allows you to review all calls held in the memory in the order
received. Ensure the transceiver is not in scan mode when reviewing the list of
selective calls received.
If no calls have been made to your transceiver, the display continues to show both the
channel and frequency numbers.
Step Action… Display shows… Remarks…
1.
No action, this is
what you see on
the display of
your transceiver.
If your transceiver
is scanning, and
as it is not on the
channel that
called, the display
shows ‘CALd’.
The last call recorded is
displayed.
2.
To view the calls
held in memory,
press
1
Disp
twice within one
second.
The first station to call is
displayed first.
The display shows the
callers identification
code (1374) and the
channel used (3).
To Next Page
Loading...
Need help?
General
