9480 HF SSB transceiver Error! Main Document Only.-1
5. Using selective call
Selective call allows you to call an individual transceiver or a
group of transceivers. This can be likened to a normal telephone
system where the called station has a unique calling address or
number. However, the operator can also call a group of stations
if desired.
Each transceiver has its own identification number. The
identification number is a four digit code that you program into
the transceiver using the front panel buttons.
The selective call feature operates by the transmission and
reception of coded signals. These signals contain the
identification number of the transceiver being called (the called
address) and the number of the transceiver making the call (the
self-identification).
All displays in this section show examples of channel and
frequency numbers. You must insert your selected channel and
frequency numbers.
To Next Page
Loading...
Need help?
General
