Codan 9480 - Deleting Unwanted Channels

Programming channels
9480 HF SSB transceiver 7-11
Deleting unwanted channels
Step Action… Display shows… Remarks…
1.
Use
Channel
to find the channel
you want to
delete.
This is an example for
channel 9.
Refer to Section 4,
Selecting channels.
2.
Press
Enter
Your next action must
start within 60 seconds.
3.
Press
Enter
Press the enter button to
scroll through the
options.
4.
Press
Enter
5.
Press twice
0
B’con
Two zeros entered as a
channel number cause
the transceiver to erase
the information in that
channel.
6.
Press
Enter
If the display shows
‘inhib’, refer to page
7-12, Programming
display messages.
q