Using the transceiver
Error! Main Document Only.-10 9480 HF SSB transceiver
Adjusting the volume
This procedure tells you how to adjust the volume. When the mute is on, pressing
either of the volume buttons opens the mute for approximately one second. This
allows you to hear the background noise, thus assisting you to select the correct level.
When you switch your transceiver on, the volume level is at the last used setting.
Step Action… Display shows… Remarks…
1.
Press either the up
or down arrow
Volume
The display does not
change.
Pressing this button
either increases or
decreases the volume.
You hear a ‘pip’ when
the volume control has
reached its operating
limit.
q
To Next Page
Loading...
Need help?
General
